NEWS from REMBE®
Q-Flap RX™ non-return valve
The new Q-Flap RX™ non-return valve is a joint development between REMBE® and the Swiss company RICO. The Q-Flap RX™ is available up to DN 1250.
The strict requirements of EN 16447 are mainly achieved through the very high strengths and flexible installation distances. This is made possible by the so-called swivel carriage principle.
Isolation is essential for an effective Explosion Safety. No matter how much operators invest into (flameless) venting, if an isolation is missing the explosion can spread within the system and continue to propagate from one facility part to another.
Flameless pressure relief for elevators: Q-Ball® E
The Q-Ball® E, which is primarily designed for elevators, uses the principle of the contour-parallel relief developed by REMBE®. Thanks to the innovative design, the weight of the Q-Ball® is very low. While comparable products from other suppliers weigh between 100-200 kg, the Q-Ball® is an absolute lightweight with just 25-50 kg. This particularly facilitates the handling during assembly, as well as the requirements for an installation on the systems in the truest sense of the word.
REMBE® Process Safety and REMBE® Kersting GmbH
At POWTECH 2019, the REMBE® Process Safety business unit will also be presenting various new products, including a non-invasive signalling system and a newly developed graphite rupture disc.
In addition to the REMBE® GmbH Safety + Control with the business units Explosion Safety and Process Safety, as well as REMBE® Research + Technology GmbH, REMBE® Kersting GmbH will also participate at the POWTECH. A new, fully automatic sampling system will be presented, that is able to depict the entire process chain from the sample extraction in one part of the plant all the way up to the laboratory. In addition to inline sampling, REMBE® Kersting offers its customers products for flow measurements, and the silo weighing of bulk materials worldwide.
You will find the REMBE® Alliance companies in Hall 5, at Booths 5-407, 5-408, 5-409 and 5-410.
Such growth not only in turnover but also in people means more space was needed! The team recently moved into bigger state of the art premises. The whole REMBE® family sends their congratulations to our colleagues in Singapore – Keep going, you are doing a great job!
Michael Hüske, Sales Manager Germany, is especially looking forward to introducing the NIMU to the visitors. It's not the first non-invasive signalling device for rupture discs, but the latest and therefore state-of-the-art technology.
Conventional signalling devices require cables to be mounted on the rupture disc, which must then be routed out through the rupture disc holder. This is not the case with the NIMU. Here, a signal indicator is attached to the rupture disc during the manufacturing process. The actual sensor is screwed into a blind tapping in the rupture disc holder, where it monitors the position of the signal indicator on the rupture disc. This means that the wiring only starts outside the rupture disc holder.
The system is leak-proof, and back in operation quicker
After an overpressure event, and the associated opening of the rupture disc, the outlet part of the rupture disc holder must be removed, the rupture disc replaced, and afterwards the system can be put back into operation. The days when the signalling cables also had to be routed again to the respective switching box are finally over. This allows colleagues from the electrical department to devote their attention to other tasks.
Additionally: The process is absolutely leak-tight. The blind tapping in the holder replaces the tapping which is usually required. The absence of cable glands (required for the holder tappings for conventional signalling cables) means that the cable glands used cannot become porous, thus preventing an escape of the process media.
NIMU, the non-invasive signalling: Sensor in a blind tapping in the rupture disc holder, and signal indicator on the rupture disc.
When the KUB® rupture disc opens, the NIMU sensor will output information to the process control unit of the system.
GRX® - cool and hot
If the process temperature is between -180 °C and 1,500 °C, the process involves corrosive media, and the rupture disc must already respond at a relatively low pressure, then the REMBE® graphite rupture disc GRX® is ideally suited to relieve the pressure. Thanks to a specially developed coating, the GRX® does not require polymeric sealants, and is able to withstand the aforementioned demanding process conditions, while still guaranteeing absolute leak-tightness. This in turn reduces the emissions of the system.
REMBE® graphite rupture disc GRX®
We are looking forward to meeting you at ACHEMA (11.06.-15.06.2018) in hall 9.1 booth C4.
REMBE® and CSE will also provide you with support for the design of your process. The CSE Sizing Service will calculate and determine the ideal safety concept for your system. As a solution, you will be provided with a design and evaluation of the safety devices, as well as customized and customer-specific safety reports or expert opinions. REMBE® will provide you with precisely the right products and support, if necessary, as well as installation and maintenance.
In the event that new systems are created, or the development of a new building or system parts, component tests and the associated certifications will be essential. CSE Engineering and REMBE® will conduct these tests and certifications for you, determine the necessary safety-related characteristic values and, if necessary, carry out the fluid examinations. For this purpose, the REMBE® engineers from the team of Dr. Stefan Rüsenberg, the employees of CSE, as well as other well-known companies in the industry have developed a unique test circuit that enables measurements at pressures of up to 3,400 bar and more.
You can benefit from the REMBE® & CSE cooperation and work with the crème de la crème of the German process safety industry! For optimum system safety, reliable pressure relief, and minimal downtime!
For more information on CSE Engineering, please visit http://cse-engineering.de/
Do you have a specific concern? Contact the right contact person directly:
Dr. Stefan Rüsenberg
[email protected], Tel. +49 2961 7405-148
Prof. Jürgen Schmidt
[email protected], Tel. +49 721 6699 4780
The original of the flameless venting devices, the Q-Rohr®, is now certified for gas explosions. Originally developed for organic dusts, it has also been approved for different types of metal dusts, dual-fuel and gas engines for some time. In the field of gas applications, a broad range of plants in the chemical industry, as well as various test rigs have already been equipped with the Q-Rohr®.
Roland Bunse, responsible for new applications and upgrading (further) development of the Q-Rohr® since the 1990s: "The Q-Rohr® can be used anywhere, where gas-air mixtures could enable an explosion. This is the case in many industries and factories, whereas test benches are only one example thereof. I am looking forward to the upcoming inquiries - of which there are several interesting challenges currently available with very different applications, which we can all protect with the Q-Rohr®."
The Q-Rohr® consists of a explosion vent with a burst indicator, as well as a stainless-steel mesh filter. In case of an explosion the explosion vent of the Q-Rohr® will open, the inserted special mesh filter will efficiently cool down the flames of the explosion and reduce any escaping pressure to a safe minimum. System and environment are therefore ideally protected.
Jan Cleijne comes with a wealth of experience, having spent more than 22 years in the Explosion Safety Industry. As well as bringing extensive industry knowledge, Jan is formally certified for Dust Explosion Prevention and Limiting Systems, as an expert in investigating Dust Explosions and in the IECEx Certificate of Personnel Competence.
“I am very excited to progress to a higher level of dust explosion safety with REMBE® and I am looking forward to working with some major global players. I am fortunate to be joining such a respected team of experts and a company which prides itself on its quality engineering solutions”
Dr Johannes Lottermann, Director of Explosion Safety said “Jan’s many years of experience makes him a key addition to the REMBE® family. He is the perfect fit in adherence with our motto of Consulting. Engineering. Products. Service. I’m extremely pleased that we were able to find someone of Jan’s calibre to join our team and I’m confident he will play a key role in supporting our customers worldwide”
Jan Cleijne will focus on Explosion Safety Projects for spray dryers, food, biomass, brewing and wood working industries in the BENELUX area and worldwide.
Gronbech & Sonner already represents some leading high quality manufacturers, mainly from elsewhere in Europe and REMBE® is a good fit for their product portfolio. Their approach of creating value for their customers - not just by providing quality components, but also safe and sustainable solutions goes together with Consulting. Engineering. Products. Service.
A good match
Jens Bang Holmgaard, sales manager at Gronbech & Sonner, says “we have long been looking for a partner in this area and when REMBE® was open for cooperation, the rest was just details. The two companies' values are close to each other and our initial conversations around how we will serve the Danish market have gone really well”
"In Gronbech & Sonner we feel that we have a partner that can handle the job and already has an advantageous position in the markets and industries we cater to," continues Claire Lloyd, Business Development, Europe, from REMBE®.
"Training of staff at Gronbech & Sonner is already well under way and the organization has already shown a great deal of commitment that bodes well for cooperation in the future. We are looking forward to a close collaboration in 2017" concludes Claire Lloyd.
If you want to know more about REMBE® products in Denmark please contact Morten Rasch on [email protected] or + 45 33266328